RoboCutters

V-Slot Profile system, Electronic Die Cutters, CNC Kit Machines and more, all from the same reliable supplier.




 view your cart


 
 Checkout
B - RoboCutter 8x4 CNC C-Beam Kit
B - RoboCutter 8x4 CNC C-Beam Kit

 

 

 

 

 

 

 

 

 

 

 

 

8x4 CNC C-Beam Kit 
 

All the parts and individual sets for building up to an 8ft x 4ft CNC kit, this kit utilises 20mm wide steel reinforced belt drive, M8 Screws on the Y gantries, and a unique M8 Eccentric Spacer 'clamp' so there is no need to adjust several eccentrics!

Accuracy is very good, build time is minimal for the gantries. 

When assembled the kit can accommodate up to full 8'x4' sheets.

 8x4 cnc kit
 
Also see these: Y_GantryXYZ
 
Shown here with a bed, this is not currently supplied so is not part of the sale.

 8x4 cnc kit

8x4 cnc kit  
 
  • Can be supplied with Y (long length) profiles shorter than 3M (for instance 2M) if 3M is too long
  • 6mm thick plates all round
  • Steel Rails bonded to the C-Beam on the Y axis
  • M8 Eccentric spacer plates, allowing single Eccentric spacer alteration
  • Wheel sets can be assembled prior to putting on the Y plates saving masses of time.
  • X Axis 1335mm (52in) cut area, over 4ft
  • Y Axis 2950mm (116in) cut area, over 8ft
  • SuperOX X plates so C-Beam can be used on the X axis
  • X beam is 1500mm, this can be lowered to give more rigidity when cutting hard materials
  • Steel Wheels on the Y axes, 5 year guarantee
  • Xtreme wheels on the X axis
  • 5 x 6020 profiles cut to size to provide bed supports.
  • M8 Bolts on all Y wheels for ultra rigidity
  • Dual T2.5 belts all round for ultra precision.
  • Y pulleys can run inside the C-Beam or for wider belt on top of the C-Beam
  • Extra height Z axis with dual C-Beam plate for enhanced rigidty in the Z plane
  • Enhanced Idler pulley bearings tighten the belt around the pulley system
 
8x4 cnc kit
 8x4 cnc kit
8x4 cnc kit

 
8x4 cnc kit

8x4 cnc kit
 
 
 Note the M8 bolts and the Single Eccentric Spacer!
 


shown here with 10mm belt
  
8x4 cnc kit
 
 

  

 

 

Price: £950.00 (£1,140.00 Inc. VAT)
1,069.65 1,256.78 USD
 The AT2.5 belt is polyurethane based and is 9mm wide so it is far stronger than the GT-3mm belt. This belt upgrade also includes other upgraded components as well
 The AT5 belt is polyurethane based and is 9mm wide so it is far stronger than the GT-3mm belt. This belt upgrade also includes other upgraded components as well
 

See here for details

 

See here for details

 

Check out this useful guide before deciding!

Note, we have no affiliation with the above company and do not provide all the parts shown, this reference is intended to be a link to a guide for wiring limit switches only.

 

see here

 

Mach3

UC100 USB

Quantity:
« Previous | Next »